Rode NTG-1 Directional Microphone

Daily $10Weekly $30
 



Operation output impedance: The NTG-1 will operate satisfactorily into a load impedance as low as 1 k§Ù. If a load below this is used, the output signal level will be reduced. The NTG-1¡¯s output is balanced between pin 2 (hot), pin 3 (cold) and pin 1 is ground.

Acoustic principle: Line plus Gradient.

Directional pattern: Super-Cardioid.

Frequency range: 20 Hz ~ 20 kHz selectable HPF @ 80 Hz/12 dB octave

Output impedance: 50 Ù

Signal noise ratio din iec 651: 76 dB (1 kHz rel. 1 Pa; per IEC651, IEC268-15)

Equvalent noise: 18 dB SPL (per IEC651, IEC268-15)

Maximum spl: 139 dB (@ 1% THD into 1 kÙ)

Sensitivity: -36 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in free field into open circuit)

Dynamic range din iec 651: 121 dB (per IEC651, IEC268-15)

Power supply voltage: P48 Phantom, 44 V to 52 V

Current consumption: 3.5 mA

Output connection: 3 pin XLR, balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)

Weight with battery: 105 g approx. (3.37 oz.)

Dimensions width: 217mm

Dimensions depth: 22mm

Dimensions height: 22mm